RS5100 Single Finger Bluetooth Ring Scanner
MODELS
RS5100
The 'Go-Everywhere' Wearable Scanner Built for the Enterprise
Today’s workers have high expectations for wearable devices — a modern design, a minimal footprint, and so easy to use that virtually no training is required. Your business requires a design that’s at home in both customer-facing areas and the warehouse, multiple wearable options for maximum use case flexibility, a rugged design to ensure a long lifecycle with a low Total Cost of Ownership (TCO), scanning options that match the needs of your environment, plus backroom accessories that reduce management time and cost. Now, you can have it all with the RS5100 Bluetooth Wearable Scanner.
Dimensions |
2.67 in. L x 1.10 in. W x 0.83 in. D (2.4 cubic inches) |
Weight | 2.47 oz./70 g |
Power | 480 mAh standard; 735 mAh extended; PowerPrecision+; Li-ion battery pack |
Optical Resolution | 1280 x 960 pixels |
Roll | 360° |
Pitch | ±60° |
Skew | ±60° |
Aiming Element |
SE4710: 610 nm LED SE4770: 655 nm Laser |
Illumination Element |
SE4710: 1 Hyper Red 660 nm LED SE4770: 1 Hyper Red 660 nm LED or 1 Warm-White LED |
Field of View |
SE4710: Horizontal: 42°, Vertical: 28° SE4770: Horizontal: 48°, Vertical: 30° |
Ambient Light Immunity (from total darkness | Max 107,639 lux (direct sunlight) |
Supported 1D Symbologies | Code 39, Code 128, Code 93, Codebar/NW7, Code 11, MSI, UPC/EAN, I 2 of 5, Korean 3 of 5, GSI DataBar, Base 32 (Italian Pharma) |
Supported 2D Symbologies |
PDF417, Micro PDF417, Composite Codes, TLC-39, |
Supported OCR Symbologies |
OCR-A, OCR-B |
LED |
4 RGB LEDs located at the back side of the device (programmable) |
Beeper |
Up to 85 dBA @ 10 cm from the back of the device beeper port |
Restore Key | User accessible for emergency warm boot and Bluetooth reconnect (after disconnect timeout) |
Scan Triggering | Manual ambidextrous trigger |
Operating Temp. |
32° F to 122° F/0° C to 50° with standard battery -4° F to 122° F/-20° C to 50° with extended battery |
Storage Temp. |
-40° F to 140° F/-40° C to 60° C including battery -40° F to 158° F/-40° C to 70° C excluding battery |
Humidity | 5% - 95% non condensing |
Drop Spec. | Multiple 6 ft./1.8 m drops to concrete over the operating temperature range |
Tumble Spec. | 1,000 1.64 ft./0.5 m tumbles |
Sealing |
IEC 60529: IP65 |
Vibration | Sine 5-2000Hz, 4g peak, 1 hour per axis; Random 20-2000Hz, 6g RMS or 0.04g2/Hz, 1 hour per axis |
Pairing | NFC; Tap to Pair |
Electrostatic Discharge (ESD) | ±15kVdc air discharge; ±8kVdc contact discharge |